TRACIT-600A - Heat Transfer Cements - Hardening
Hardening Heat transfer Cements are used for high temperature process maintenance and freeze protection on straight run piping, valves, elbows, pumps and flanges
This compound forms a highly conductive bond between the heater and process line and is also used with heating jackets, and with plate-type coil applications.
TRACIT-600A high temperature heat transfer compound (cement) hardens when cured. This product is recommended for use on steam or electric tracing (tubing) attached to process pipes where the temperature will exceed 400°C.
Also recommended for high-temperature applications such as ring heaters, strip heaters on tanks, electric platen heaters, and heat exchange.
| Typ | TRACIT-600A Heat Transfer Cements - Hardening |  |
|
| Temperatur Range max. min. |
680° C - 184° C |
||
| Thermal conductivity W/m²K | 10 | ||
| Heat transfer W/m²K | 114 - 225 | ||
| Solubility | soluble in most liquids | ||
| Colour | anthrazit | ||
| Grit size | medium | ||
| Hardening | 4 - 12 Stunden bei 70 - 100° C | ||
| Minimum processing temperature | 0° C | ||
| Shelf life | 1 - 2 Years | ||
| Standard containers (Liter / kg) | 3,8l / 6 kg 19l / 30 kg |
||
Weight / l |
1,68 kg | ||
Stand 01/20